Thursday, 21 April 2016

How to Configure Router Using

Most routers have or as their default IP address.


The is usually assigned to routers manufactured by D-Link, TP-LINK or Netgear.

Let us have a look at how to configure router using, and change the network name and password.

Configuring Wireless Network Using


To configure your wireless network, you need to plug-in your router to a power supply. Connect the modem of your Internet connection to the router. Now, follow the steps and configure the router using the admin page.

  • Enter the default IP address in your browser address bar.
  • Enter the default username and password when prompted. The default for D-Link routers is admin as the username and password needs to be kept blank. In case of Netgear the default username is admin and the password is password or 1234.
  • Now, after you gain access to the router admin home page, you need to go the Wireless section.
  • Enter the Scheduling for wireless settings as ‘Always’.
  • Enter the Wireless Network Name or SSID. This will be unique identification name for your wireless network. Choose the name wisely and do not use any personal information.
  • Select the Wireless Channel that helps optimize the performance and coverage of your wireless network.
  • Now, choose the 802.11 Mode as ‘Only’ or ‘Mixed’ mode if available.
  • Keep the Visibility status  as ‘Visible’. This will allow your network name to be broadcasted and allow other devices to seek permission to connect to your network.
  • In the Security Mode  select WPA-Personal  and enter the Passphrase or Pre-shared key.
  • The pre-shared key has to be at least 8 letters long and contain upper case letters, lower case letters, numbers as well as special characters. The pre-shared key has to be strong and difficult to hack.

There are many other settings that you can add or change in the router configuration page. Make sure you know what you need to do and then carry out the changes.

Keep the SSID name visible, if you wish to broadcast it. Or else, turn it to invisible and no one can find your network in the surroundings.


Some routers support USB printer, scanner or storage devices. You can select to share your network with these devices, if you want to.

Read the manual if you cannot find or understand certain things. For most users, the basic configuration is enough to get the wireless network up and running.


Wifi password log in

How to Hide Your IP Address

Did you know all your activities on the Internet can easily be tracked? When you browse the Internet, the Internet Service Provider assigns your computer with an IP Address.

The IP address is unique to your computer and can help locate you as well as trace your Internet activity. But did you know there are ways to conceal your IP address?

Read on learn more about how to hide your IP address and protect your privacy.

Why Should I Hide My IP Address?

There are many reasons to hide IP address. Some may need it to remain safe online and protect themselves from hackers. Some may need to prevent themselves and their loved ones from online frauds.

At times, businesses need to protect their identity and hide their moves online from competitors. Today, data mining on websites is a very large business and thus, requires one to maintain Internet privacy.

A few users need to hide their geographical location in order to access certain websites blocked by their country or other countries. Hiding IP address also prevents one from leaving their digital footprint online.

How to Hide IP?

There are a few ways to hide your IP address. Let us look at the common ways to hide IP and protect your identity online.

1.Using VPN Proxy

The safest way to protect your privacy is by using a trusted VPN proxy service. A few popular VPN proxy servers are reliable and safe. These include:
  • Hide My Ass VPN
  • VyprVPN
  • Hotspot Shield Elite
  • NordVPN

2.Website Based Proxy Servers

Another popular way to hide IP address is using a website based proxy server. These are site based proxy servers, so you do not need to install any software on your computer.

Some of the popular sites to block your IP address include:

However, keep in mind some of these proxy servers are not safe to use, as they do not offer secured connection (SSL).


3.Browser Configured Proxy Servers

The other method to hide IP address is by choosing any one of the open proxies available on the Internet. These freely available proxy servers provide you with an IP address and configures your browser so that the original IP remains hidden. However, as these are open and freely available, they are too slow to perform.

Using either of the above three methods, you can hide your IP address. Choosing a VPN proxy will ensure that you remain safe and hide your IP address successfully. Any other method is a bit risky and one should refrain from doing any financial or private browsing on such proxy servers that makes one vulnerable to attack.


Wifi password log in admin




Wednesday, 20 April 2016

How can I find my networks SSID

The following article will serve as a guide and help you answer the question how can I find my network’s SSID.

Locate Network’s SSID


If you want to search for the default SSID of the router, you need to look for it on your device itself. Just look on the side or the bottom of the device for a sticker. It will have all the information printed over it like the SSID or ‘Network Name’. The SSID will be printed near the barcode.


How to Use Another Device to Find Network’s SSID

If you are using a device to connect to your network, it can be used to find your network's SSID.


If you are a Windows user, you need to left click on the signal icon located at the bottom right of your panel on the desktop. Find the name of the network in the list that says “Connected”. This Connected network is your SSID.

Mac OS

Mac users need to select the Wi-Fi icon from the menu bar and search for a list of network with a check mark. This check marked SSID is your network.



iOS users need to select ‘Settings’ and select ‘Wi-Fi’. In this list find a network with a check mark.


Android users need to select ‘Settings’ and select ‘Wi-Fi’. In the list of networks, find one that says ‘Connected’.

How to Find SSID from Router Admin Page


You need to enter the default IP address of your router within the browser of your computer. Now, enter the default username and password to gain access to the admin page. This information will be available on the sticker on the router device. Now, after gaining access, look for the settings page and you will find ‘SSID’ or ‘Network Name’. The name displayed here will be your network’s SSID. If you wish, you can change it as you wish and click ‘SAVE’. This new SSID will now be displayed on all your devices.

This is all you need to do to find the network’s SSID.


Wifi password log in admin  


What Is an IP Address Conflict

What Is an IP Address Conflict?

When trying to connect to the Internet, you find a message IP address conflict flashing on your screen. This does not allow you to connect to the Internet and get on with your work. What is an IP address conflict? How does it affect your connectivity and are there any steps to resolve this issue? 

All these and many more questions are answered in the article below.

What is an IP Address Conflict?

IP address conflict is a very inconvenient issue faced by users. This problem that occurs when two or more devices are assigned the same IP address. This causes them to become useless in terms of connectivity. 

An IP address is the unique identifier of every computer or device that can be connected to the Internet. It consists of numbers such as If this number is not assigned to a device, the device cannot connect to a network. 

When an error message such as IP address conflict comes up, it is usually because the IP address of one device is in conflict with another device. An IP address can be static or dynamic. Static IP addresses are those that do not change and need to be manually assigned. On the other hand, the dynamic IP addresses are those that can be temporarily assigned and the device gets a new IP address every time it gets connected to the Internet or router.

Static and dynamic IP addresses both can face the problem of IP address conflict. However, static IP is more likely to have this problem than dynamic IP address.

Why does it Occur?

An IP address conflict can occur in several ways. 

These include:

  • When a system administrator assigns two computers the same static IP address on the LAN.
  • A computer is assigned a static IP address within the local network’s DHCP range (dynamic IP range) and the same IP address is assigned by a local DHCP server.
  • Multiple computers are assigned the same IP address due to a malfunction in the network’s DHCP server.
  • When a laptop or computer is put on standby or hibernate mode and awakened later on.
  • When two customers are assigned the same IP address by mistake by an Internet Service Provider (ISP).

How to Resolve It?

In order to resolve IP address conflict, one needs to:

  • Ensure that the local host is configured with a unique IP address in networks where the IP addresses are fixed, that is, statically assigned.
  • In computers that have dynamically, assigned IP addresses should be given renewed IP addresses to avoid IP address conflicts.
  • Upgrade the router firmware if the home router is facing a faulty DHCP server that leads to IP address conflicts. 

This is all about what is an IP address conflict. If your issue is not resolved you can call your ISP provider for help or bring in a technical expert who will solve this conflicting problem for you.


How can I Find My Router's Default User Name and Password

It is very easy to find a router’s default username and password. If you are wondering, how can I find my router’s default username and password, the following information will prove to be helpful.

Finding Router Username and Password


The default username and password for most models by different manufactures is standard. The best way to know the username and password of your router is to look at on your device itself.

Most manufactures print the username and password on the router itself. Just turn your router upside down and you will find the factory set username and password printed over it.

In case you don’t find it there (which is highly unlikely), you need to look for it in the user manual. All manufacturers print this information in the user manual that comes along within the package.

If you have misplaced your manual, you can look for the default username and password on the Internet. Just enter the name, model number of the router and search for its username and password.

This is all you need to do to find your router’s default username and password. With this information, you can log into your router’s admin page and make changes as per your needs.


Wifi password log in admin  

Some of the default user name and passwords for the router

Sunday, 17 April 2016

How to Configure Router Using IP

Configuring your router is an easy deal if you know the right thing to do. It is important you refer to your router user manual before you try anything new.

This will make sure you know the minor changes you may have to follow when setting up your router.

We shall show you how to configure router using as a general DIY guide for most router models.

Configuring Router Using

Now, most manufacturers have as their default IP address. This default IP address is actually your gateway to get access to the router admin page.

Let us have a look at the steps to configure wireless router using

  • Type the IP address in your web browser address bar.
  • You will be prompted to enter the default username and password. You will get this information printed on the back of your router device. Or even in the user manual. It is usually admin as the username and password.
  • Now, after gaining access to the admin home page, you need to first go to the Setup/Wireless Setting/Basic Setup page. 
  • Choose Automatic Configuration for DHCP. 
  • Now, set up the IP address for the router. The IP address is and the subnet mask is
  • Give your router a name. Choose the Router Name like Home-Router, etc.
  • Keep the DHCP Server on Enabled. This will ensure any device that connects to your network is assigned an IP address automatically.
  • Now, move over to the Wireless tab and go to the Basic Wireless Settings.
  • You need to choose the Network Name, that is, the SSID. This SSID will be displayed on all devices that search for a Wi-FI network. Make sure this name is unique and does not contain any personal information.
  • Make sure you enable the Wireless SSID Broadcast so that other wireless clients can identify and detect your network.
  • Coming to the most important part, the Security Mode. You need to use the WEP, WPA personal or WPA2 personal security mode. If your router supports WPA2/WPA Mixed Mode, make sure you choose it.
  • Enter the password or passphrase for your network. The passphrase should be minimum 8 letters long and maximum 64 letters. It should contain upper and lower case letters, numbers as well as special characters. Do not share this passphrase with anyone until required.

You need to click on Save or Submit and save your router settings. Try to connect a device after you configure the device using You just need to enter the passphrase you entered and your device will be connected to the internet using your wireless network.

Friday, 15 April 2016

How can I change my routers password

It is always a good idea to keep your Wi-Fi router protected by using some simple security measures.

One such measure is to add a password to your router and keep changing it regularly.

Let us answer the question how can I change my router’s password from the following paragraphs.

How can I change my routers password

  • You need to first login into the router’s admin page. Just enter the default IP address into your browser. Most routers have or as their default IP address.

  • You will be asked to enter the username and password. Enter the default username and password and log in. If you do not know your default username and password, look for it on your router device. It will be printed on the underside of the device.
  • Once you gain access, you need to look for a page or tab that says Wireless or Wireless Settings or Setup.
  • In case that page has multiple sections, select the Wireless Security Page.
  • Now, look for the label that says ‘Passphrase’, ‘Password’ or ‘Shared Key’. Enter your new password in the box and re-type the same password in the next box, if your router requires it.

  • Make sure you use uppercase and lowercase alphabets along with numbers and special characters. The password should not be less than 8 letters and can be up to 64 letters long.
  • Select the WPA2 or in older devices WPA/WPA2 as the wireless encryption. This most secure network encryption will prevent someone from hacking into your account.
  • If you wish, you can even change the network SSID from the same page. This network SSID is broadcasted publically, making it very easy for the anyone to find your network. However, choose a wise name as a tantalizing name will motivate hackers to try to hack into your account.

Save your settings and your new password is ready to be used. Enter this new password to your devices that are seeking access to the network.


Wifi password log in admin  





Default Username and Password for the Router

In order to access your wireless router admin page, you need to login using a username and password. All routers come with a default username and password.

In most cases, the default username and password is same for devices made by the same manufacturer. These factory-set passwords help you access your settings, network configuration and Wi-Fi through the Internet browser. If you need to know what is default username and password for the router you are using, then read on.

Finding the Default Username and Password for the router

Most of the factory set passwords and usernames for a router are printed on the device itself. Just pick up your device and turn it over. You will find the default username and password printed just below or near the default IP address. Use this information to access your router admin page.

List of Default Username and Password

There are plenty of manufacturers of router devices and each one has a different username and password. However, we will enlist a few of the most popular router devices usernames and passwords.


Username- admin
Password- admin


Username- Blank/admin
Password- Blank


Username- admin
Password- password/1234

Sponsored sites


Username- admin
Password- admin


Username- admin/ CISCO
Password- admin/ CISCO


Username- admin
Password- admin


Username- admin
Password- admin

Sponsored sites 

If these username and passwords don’t work, it may be because many routers have different defaults for different models. You can check the manual that comes along with the device for default settings or else search the Internet and find the default username and password for your specific model.

With the help of these default username and password, you can access the admin page and customize the router settings as per your needs.


Wifi password log in admin